The PrioLine® concept is based upon special profiles.
Additionally, we offer you a wide selection of customized enclosure solutions made of PLASTIC and METAL.
Challenge us and send us your requirements and your ideas.
We will help you to find a reasonably priced, efficient solution.

PLASTIC

Customer-specific enclosure used as receptacle for a transponder unit
Supplied incl. fitting parts, base plate, varnishing and polychrome printing

Problem:
An appropriate enclosure for a transponder unit was required.

Solution:
Design and preparation of drawings based upon printed circuit board provided by the customer. Enclosure made of plastic, with integrated cable feedthrough, transparent bottom part, visible surfaces varnished in light grey and top side with 2-color printing

More pictures  ==>

Enclosure system for REMOTE CONTROL, manufactured completely acc. to customer specifications: Supplied completely incl. connexion cable with SUB-D25 at the end, 5m long

ENCLOSURE:

• made of plastic 80x160x40mm
• incl. mechanical processing
• incl. base plate of aluminum, unscrewable
• grounded/varnished in RAL 7035

FOIL KEYBOARD:

• 2-color back-printing
• 9 integrated snap domes
• 8 integrated SMD-LEDs
• 8 integrated multipliers for 24V-operation
• incl. assembly and electr. test

More pictures ==>

METAL

Customized enclosure for a medical device

Problem:

Separate display- and operating units for a medical device had to be designed as customized versions. Both had to be mounted onto a trolley provided by the customer.

Solution:
Construction and preparation of drawings on the basis of customer-provided circuit boards and mounting-parts. Operating and machine enclosure as bent and welded aluminum construction

Contact surfaces chromated (electrically conductive) / visible surfaces chemically resistant and varnished in silver

More pictures ==>

Enclosure for a heat regulation unit

• made of aluminum 3mm, executed as  weldment/bent component
• apertures acc. to customer specifications
• without visible screws in using position
• surface: 2-color varnish acc. to RAL
• 3-color printing (front-, back- and support  plates and on the perforated plate)
• incl. INSERT PLATE, replaceable
•   made of aluminum
•   with 4 back side threaded bolts

More information and pictures ==>

Customized enclosure for a dental device

Problem:
A display and operating unit for a dental device had to be designed as customized version.

Extracts from the requirement specification:

• console-shaped
• construction on the basis of circuit boards and mounting-parts provided by the customer
• easy to clean, no rough edges
• mounting possibility for an easily accessible EMERGENCY-OFF-switch
• easy integration of the components and circuit boards
• NO visible screws from the outside
• lockable
• good EMC properties
• chemically resistant surface
• integrated operating-/display unit
• available on short notice

Solution:
Operating and machine enclosure as bent and welded aluminum construction. Contact surfaces chromated (electrically conductive) / visible surfaces chemically resistant and varnished in silver (multi-layer technique). Input via a customized foil keyboard flush with the front, where the display window is also integrated in a waterproof manner. Manufactured and delivered in express service.
More pictures ==>

Customized enclosure for a monitoring device

More pictures ==>

Problem:
A display and operating unit for a monitoring device had to be designed as customized version.

Extracts from the requirement specification:

• enclosure with customized dimensions and fixing devices
• easy assembly, flat and space-saving integration of the components and circuit boards required for display and operation
• good EMC properties
• customer-specific surface
• display back lighting not by means of EL-foil, but as LED-unit

Solution:

• aluminum enclosure as 2-parts bent aluminum construction
• contact surfaces chromated (electrically conductive) / visible surfaces varnished in yellow
• fixing parts and apertures acc. to customer specifications
• input via a customized foil keyboard in the cover
• the windows as well as the display itself are integrated in a dust- and waterproof manner, the same applies to the LCD controller. Extremely compact and space-saving assembly in  FOILtronic®-technique.
• back lighting unit for LCD on the basis of LED-light guides
• display and back lighting system are protected against being pushed through/mechanical influences
• contacting of LED, LCD and keys via integrated foil cable with crimped sockets

Customized enclosure for laptop-accessory device

Enclosure for laptop-accessory device
W300 x D290 x H75

• incl. apertures
• incl. fixing parts
• incl. surface
• incl. foil keyboard

More pictures ==>

Customized enclosure for medical device

More pictures ==>

Problem:
A customized table enclosure for a medical device was required.

Extracts from the requirement specification:

• rugged, heavy duty construction
• customized execution
• good EMC properties
• chemically resistant surface
• integrated maintenance flap in the bottom part
• rear fixing device for optional TFT-display-enclosure

Enclosure for medical device cplt. with operating unit   D300 x W266 x H92

ENCLOSURE:

• carried out as aluminum bent component

SPECIAL FEATURE:

• no visible screws in using position
• incl. side flap .....

More information and pictures ==>

© 2002-10 Richard Wöhr GmbH  Gräfenau 58-60  D-75339 Höfen/Enz  Impressum

Tel: 07081/9540-0

Fax: 07081/9540-90

Email: Prioline@WoehrGmbH.de

Design and Webhosting durch RPF Netdesign letztes Update: 11/08/10